Knex Sidearm
i made a big rifle but i also wanted an effecient small pistol like weapon. here it is!
PROS-
-light
-easy to make
-holds 11 rounds
-adjustable front sight
-shoots 50 feet with good bands
CONS-
-rediculously unaccurate
-your hand will sometimes interfier the ram while firing
-ram can sometimes be hard to pull back because it will catch on the ammo
RATING- out of 10
mobility- ========== (10)
range- ======= (6)
accuracy- ==== (4)
ammo capacity- ======= (7)
suggested retail price- 10,000 dolphins
PROS-
-light
-easy to make
-holds 11 rounds
-adjustable front sight
-shoots 50 feet with good bands
CONS-
-rediculously unaccurate
-your hand will sometimes interfier the ram while firing
-ram can sometimes be hard to pull back because it will catch on the ammo
RATING- out of 10
mobility- ========== (10)
range- ======= (6)
accuracy- ==== (4)
ammo capacity- ======= (7)
suggested retail price- 10,000 dolphins
Handle, Ram and Trigger
sorry, image notes wont save,
pic 1- 10 blue connectors attached with 2 yellow rods
pic 2- make (the black piece on top is a Y connector
pic 3- make
pic 4- attach
pic 5-the top is the mag pusher, the middle is the ram, the bottom is how to make the ram and you can chose between the black or orange piece
pic 1- 10 blue connectors attached with 2 yellow rods
pic 2- make (the black piece on top is a Y connector
pic 3- make
pic 4- attach
pic 5-the top is the mag pusher, the middle is the ram, the bottom is how to make the ram and you can chose between the black or orange piece
Mag
the bottom orange connectors can be single slot connectors i was just too lazy to find any :P
pic 1- same pannels for both layers
pic 2- side
pic 1- same pannels for both layers
pic 2- side
Barrel
pic 1- top- cut orange connectors :( , bottom- sight
pic 2- back of the barrel
pic 3- middle of the barrel (the clips on the very right must face inwards so it can guide the trigger)
pic 4- end of the barrel
pic 5- attach
pic 2- back of the barrel
pic 3- middle of the barrel (the clips on the very right must face inwards so it can guide the trigger)
pic 4- end of the barrel
pic 5- attach
Assembly
pic 1- handle goes here
pic 2- trigger goes here, the y connector attaches to the black snowflake
pic 3- place a 2 slot connecter on both sides like so and attach with a blue rod
pic 4- attach the mag like so... (you may have to remove the top semi circle connector and slide through the top, next to the bullet guide
pic 5- put the ram through the back and add the back sight (please turn the sight around...its only turned in this pic so u know what connector it is)
pic 6- mag pusher goes in like so
pic 7- fires white rods
pic 2- trigger goes here, the y connector attaches to the black snowflake
pic 3- place a 2 slot connecter on both sides like so and attach with a blue rod
pic 4- attach the mag like so... (you may have to remove the top semi circle connector and slide through the top, next to the bullet guide
pic 5- put the ram through the back and add the back sight (please turn the sight around...its only turned in this pic so u know what connector it is)
pic 6- mag pusher goes in like so
pic 7- fires white rods
Done!
attach a rubber band so it pulls the mag pusher up, and a rubber band to pull the trigger up when the gun is loaded. then just add rubber bands to the ram so it fires!