Knex Switchblade With Holster
by chopstx in Living > LEGO & K'NEX
3908 Views, 7 Favorites, 0 Comments
Knex Switchblade With Holster
okay i admit it i modded some mykhailo's design. this one actually stays open or closed by rubberband power. no more unhooking knex pieces for you my friend!!!
If you like it, please rate and subscribe.
If you like it, please rate and subscribe.
Sides
simply make.
Connecting
pic 1 - make
pic 2 - another view
pic 3-4 - connect, it dosn't matter which side it is on. theyre the same.
pic 2 - another view
pic 3-4 - connect, it dosn't matter which side it is on. theyre the same.
Blade
pic 1 - build
pic 2 - connect to sides with a white rod
pic 2 - connect to sides with a white rod
Step4
pic 1 - build
pic 2 - slide in.
pic 2 - slide in.
Rubberband
pic 1 - put rubberband in hole of green connector like so
pic 2-3 - hook rubberband
pic 2-3 - hook rubberband
Pictures
pics
Holster
1 what your building
2-4 make
5 add another brown two way connector then the grey, one hole connectors
6-7 slide the knife in
you are done! yay! now get out of my sight! jkjk
2-4 make
5 add another brown two way connector then the grey, one hole connectors
6-7 slide the knife in
you are done! yay! now get out of my sight! jkjk