Leather Wash / Toiletries Bag

by thelastofthegentlemen in Living > Beauty

4941 Views, 116 Favorites, 0 Comments

Leather Wash / Toiletries Bag

temp_-270032727.jpg
temp_-1552381939.jpg
after searching on the old tintaweb for a new leather toiletries bag I was a bit disappointed with the choice and the price :/ so I thought I would have a go and try and make one myself ...how hard can it be!!!

Tools and Materials

temp_-737491060.jpg
Firstly a nice peice of leather ..ebay has offcuts for sale for quite cheap I managed to get the leather I needed for 15 squid :)

smooth faced hammer
scissors
glue ( I used rubber glue , very easy to remove if you get it where you shouldn't)
leather pen
large ruler eyelet punch
snap rivets
and a hair dryer or heat gun..

and if you are hand stitching it
leather needle
thread
beeswax ( not essential but makes life easier )
and a stitch marking wheel.

Lets Begin :)

temp_-1142958273.jpg
temp_634924104.jpg
temp_-910258597.jpg
Firstly decide on the size you require then simply cut some board to size I used leather board but any flexible material will do you could even used cardboard .. then sandwich it between two bit's of leather glueing as you go .

Side Walls

temp_189780085.jpg
temp_-462581637.jpg
temp_-1037190556.jpg
temp_1253061769.jpg
temp_-1131982239.jpg
temp_-1386202590.jpg
then measure around the base and cut you leather, add 20mm on to allow for the overturned stitch

Connecting the Two

temp_-1301379254.jpg
temp_-823607747.jpg
temp_-2078954142.jpg
temp_656361942.jpg
temp_1659249193.jpg
turn the leather inside out and start to glue around the base remembering to mark it with your leather pen so you can use it as a stitching line ...quick stitch round and you're done ..

Support Strap

temp_-803651155.jpg
temp_-172232383.jpg
temp_-558860646.jpg
temp_2050582954.jpg
temp_1149331465.jpg
temp_-2010146857.jpg
temp_472483476.jpg
temp_1466515560.jpg
temp_-1490650401.jpg
temp_-1698492262.jpg
temp_-1119177451.jpg
Firstly turn over about 10mm of the leather at the top of the bag .

then cut a strip of leather and glue like pics 234 and glue the zip as pic 5 then stitch as shown .

once stitched glue a the leather into a loop this will be the strap for the wash bag ..then glue in the top of the bag making sure you line it up with the vertical stitch on the side wall ...and stitch a square.

temp_1625789599.jpg
temp_-1163697216.jpg
temp_718467450.jpg
temp_1783297238.jpg
then copy on the other side but make this strap considerably smaller.
then glue the zip to the bag and put a straight stich in along this line securing the zip .

Final Step

temp_298364707.jpg
temp_-720993756.jpg
add a couple of snap rivets to the end of the zip on each side ...and your done :) I know this instructable looks complicated but believe me its not ..you could also glue some material on the back of the leather so when its all stitched up it has a liner .. hope you have enjoyed this instructable and I hope you give it a shot ...thanks :)