Water Sensor Tutorial!!!

Hey, guys this tutorial is to tell how to use a liquid level sensor. so let begin!

:) :):):):):):):):):):)

PART LIST :

1. Arduino (uno)

2. 4 wires (as shown in the image above)

3. liquid sensor

In the next step I will tell how to connect them. GO TO THE NEXT STEP

Connect the + to 5V on the arduino

Connect the - to GND on the arduino

Connect the s to A5 on the arduino

WARNING : Don't hold the sensor form the that lines part it may DESTROY THE SENSOR.

here is the code:

Open the serial monitor and check the readings on the monitor and if it doesn't give reading check your

connections again and again.

;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;)

Hoooorayyyyyyyyyyyy...................