Loom Band Ladder Bracelet

today I will be showing you how to make a ladder bracelet
made out of loom bands...

Loom Position

make sure your loom is as shown in this photo.

Let Start the Border

you can do what ever color you want as your border in this case mine is black I think it makes the colors stand out better.
1.start from your middle peg to the top left peg
2.now from that left peg keep going until you reach the second to last peg and from there place a band from the left peg to the last middle peg make sure it looks like the second photo

do the same for the right side

it should look like the third photo

Placing Horizontal Bands

1.skip one row of pegs and start with the next one as shown in the first photo my color is blue
2.keep doing the same until the end make sure it looks like the second photo

Placing the Middle Bands

1.start from the first peg to the second peg as shown in the first photo . my color is pink
2. repeat this step until the very end.

Placing Horizontal Bands AGAIN

1.do the same as last time
it should look like the first photo
and second photo when its done

Placing the Cap Band

1.turn your loom around
2.take your hook & one rubber band "same color as your border"
wrap it around once so it has too loops as shown in the second photo
3.it should look like the third photo

TIME TO LOOP!!

1.push back the cap band and grab the top band witch would be the pink
2.loop that band back to itself
3.repeat this step till the very end
4.now start back at the first middle peg go behind the cap band and grab the next top rubber band make sure it looks like the fourth photo repeat this step till the end it should look like the fifth photo.

do the same for the other side

now it should look like the last photo !!

Time to Pull It Off the Loom

1.go all the way to the top and put your hook through all the rubber bands .
2.grab one brubber band same color as the border place it on your hook like shown in the second photo
3.pull I through DO NOT CREAT A SLIP KNOT
4.now pull it off the loom
it should look like the last photo

Create and Extention

1.make sure loom is placed like the first photo
2.place the first rubber band on the first middle peg to the second keep going until your desired length.
3.place your bracelet on the last peg you stop at
(the side with the cap band) and stretch it to the next peg like shown in the third photo
4.place an "s" or "c" clip on the other end of the bracelet like shown in the fourth photo
5.start looping till the end
6.pull it off the loom and place the side without a clip on the clip and your DONE!

HOPE YOU GUYS LIKE IT ;)