wrenchtoo

Hi, I'm Chris Ayers. I have always had an affinity for mechanical things. When I was about 8-10 years old my mother had a mixer that stopped working. I asked if I could try to fix it, Mom agreed but cut the plug off as a precaution. I took it apart looked at every part, with no idea what any of them were. I then put it back together...but now what...Mom found me sitting on the floor next to a wall outlet trying to make a plug out of tin foil. She decided it was best to satisfy my curiosity, had…

wrenchtoo's Instructables

Make a Pet Leash of Any Length

Build a Lighting System for a Shed

Use Rope to Hold the Valves in Place and R&R Valve Springs With the Cylinder Head Installed

Make a Tool From an Old Distributor Cap to Locate Top Dead Center (TDC) on the Compression Stroke for Every Cylinder

Protect a New/rebuilt Engine; Make a Tool From an Old Distributor to Prime Your Engine's Oiling System

View all Instructables