New Knex Magazines!!!!
here are my own magazine designs for white and blue knex rod ammo. on the left is the white, and on the right is the blue.
THE WHITE HOLDS APPROXIMATELY 8 RODS. THE BLUE HOLDS APPROXIMANTELY 12.
if you wish to use these, feel free. plz tell me that you are though. and give credit.
If you like it, please rate and subscribe.
THE WHITE HOLDS APPROXIMATELY 8 RODS. THE BLUE HOLDS APPROXIMANTELY 12.
if you wish to use these, feel free. plz tell me that you are though. and give credit.
If you like it, please rate and subscribe.
first off we'll build the blue rod one.
just build
just build
pic 1- build these
pic 2- connect
pic 3- another view of connection
pic 2- connect
pic 3- another view of connection
rod pusher
pic 1- build
pic 2- another view
pic 1- build
pic 2- another view
rubberband placement
slip both ends of rubberband over green rods. then pull over orangeconnector(i know what it shows in the pic but i find this to be a better way)
slip both ends of rubberband over green rods. then pull over orangeconnector(i know what it shows in the pic but i find this to be a better way)
now we'll build the white rod mag.
make 2 of these
build 2 of these
place white rod. then connect the rest. do the same on the other side
make
connect rubberbands like so.
i hope you use these!
now stop reading!
seriously stop reading!
*sigh* forget it!
i hope you use these!
now stop reading!
seriously stop reading!
*sigh* forget it!