Plastic Bag Jar Gasket and Handle

by cmrc in Craft > Reuse

5558 Views, 10 Favorites, 0 Comments

Plastic Bag Jar Gasket and Handle

IMG_0748.jpg
IMG_0749.jpg
IMG_0750.jpg
IMG_0751.jpg
IMG_0752.jpg
IMG_0753.jpg
I got the inspiration for this project here: plastic bag gasket. The premise is to create a nice gasket and a handy carrying device all at the same time. I took Tim's great idea and rather than trim the bag, I used the extra raw material to create a handle.

Parts List:

IMG_0750.jpg
You will need 2 things.

1 jar with a lid. I used a peanut butter jar because it was handy and it was plastic and would have otherwise gone into a landfill somewhere.

2 a plastic bag. Also handy as there are so many of them just laying about.

Put the Lid in the Plastic Bag

IMG_0751.jpg
IMG_0749.jpg
Just like the title says, put the lid inside the bag as close to the center as possible. Then screw the lid onto the jar. This will make the gasket portion of the handle and will ensure that the bag will not move for the next part of our project.

Make the Handle

IMG_0753.jpg
IMG_0748.jpg
IMG_0749.jpg
I simply took all of the excess plastic materials of the bag and tied a knot so that the lid was now held in place. I then put more knots in a line so that there was a "rope" of plastic coming off of the gasket at the center of the lid. I left the convenient handles of the plastic bag free of the knotting so that I could use them as the handle for my jar These handles are strong and are very nice for attaching the jar to other items.