Popcorn Ball Brains
These popcorn ball brains are super easy to make, and great bite size dessert for a Halloween party! Plus, they're nice and cheap to make. :D
I like that they're both cute and a little gory.
( I thought I was the first person that had come up with popcorn ball brains. I was so excited! But it turns out I'm not. :P )
I like that they're both cute and a little gory.
( I thought I was the first person that had come up with popcorn ball brains. I was so excited! But it turns out I'm not. :P )
Ingredients + Tools
- 10.5 bag of mini marshmallows
- 3 tablespoons of butter
- 6 cups of popcorn
- red food coloring
Tools:
- Crisco, for coating your hands
- a small paintbrush
- parchment or wax paper
Prep Work
Put the marshmallows and three tablespoons of butter in a medium/large sized bowl and microwave a minute at a time, until nice and melted together. Stir it after every time in the microwave, preferably with a silicone spatula - it's easier to clean up!
Once that's done, add 2-4 drops of red food coloring, until it's pink enough for you.
Once that's done, add 2-4 drops of red food coloring, until it's pink enough for you.
Mix the Marshmallow and Popcorn
Start the mixing by using the spatula, until it becomes too hard to stir and cools down a bit.
Coat your hands in a layer of Crisco and continue mixing everything together.
Coat your hands in a layer of Crisco and continue mixing everything together.
Shape the Balls
Take a small handful of the popcorn mix and press it together. Mine are 2-3 inches wide. :)
Set the finished balls aside on a piece of parchment or wax paper.
You can even put each ball on a wooden skewer if you're worried about sticky hands.
Set the finished balls aside on a piece of parchment or wax paper.
You can even put each ball on a wooden skewer if you're worried about sticky hands.
Paint on Them!
Put a couple drops of food coloring an a teaspoon or two of water in a small bowl.
Use a thin paintbrush to paint the mixture along the crevices of the popcorn. Yay for gore!
Let dry for a bit, and then you're ready to serve! :D
Use a thin paintbrush to paint the mixture along the crevices of the popcorn. Yay for gore!
Let dry for a bit, and then you're ready to serve! :D