Improvment for 3D Printed Rope Maker By b33ma247:
https://www.instructables.com/3D-Printed-Rope-Maker/

Materials Needed:

For 3 axes wiht hooks (I put another hook into central axis):

	4x Hex Bolts M6x60 mm
	4x M6 Nuts
	4x Hooks M6 (for example https://www.rationalstock.es/catalogo/producto/fijacion/ganchos-y-manguitos/ganchos-y-cancamos/gancho-con-rosca-interior-/20350500001/FP03072#FP03072)
	16x Spacer for hook axe by allopez
	1x RopeMaker_Cogsx4 By b33ma247 (it include 4 units to print)
	8x 606zz Bearings

For hooks assembly:

	1x RopeMaker_Front_Plate(1) by b33ma247
	1x RopeMaker_Back_Plate by b33ma247
	1x RopeMaker_Front_Plate_border by allopez
	2x Hex Bolts M6x45 mm
	3x Hex Bolts M6x50 mm
	5x Washers M6
	5x M6 nuts
	The 3 axes with hooks described above

For Hook tower:

	RopeMaker_Weight_Trough by b33ma247
	1x HookTower with bearings by allopez
	2x Spacer for hook axe by allopez
	1x Hex Bolt M6x45 mm
	1x M6 Nuts
	1x Hook M6 (for example https://www.rationalstock.es/catalogo/producto/fijacion/ganchos-y-manguitos/ganchos-y-cancamos/gancho-con-rosca-interior-/20350500001/FP03072#FP03072)
	2x 606zz Bearings
	4x 623zz bearings 
	4x Cylindrical DIN-6325 pin (https://www.rationalstock.es/catalogo/producto/materiales/calibrados-y-mecanizables/chavetas--pasadores-y-fijacion/pasador-din-6325-cilindrico--templado--de-acero-/30052000007)
	2 meter cord to tie the Weight_Trough and the HookTower with bearings


For Guide rail assembly:

	RopeMaker_GuideRail by b33ma247
	2x pulley adapter to Guide rail by allopez
	1x Pulley with bearings by allopez
	2x 500 mm length Aluminum "L" Angle 20mm x 1.5mm
	2x 623zz bearings
	4x M4x10 screws (hex or Allen, as you like)
	4x M4 nuts

Other:
	RopeMaker_StringSlide by b33ma247