#/etc/ipsec.conf
# The version 2 is only required for compatibility with openswan
version 2

config setup
    protostack=netkey

conn mytunnel
    leftid=@west
    left=192.168.3.100
    leftrsasigkey=0sAQOAVXOSPSOqgZeb4xT1M/ASlP7e7zkqUA0pOctoHZTF/udKc3LXfBUYW9Vf6FN5BjH1WDiieibUMeq03gJIwLoT
    rightid=@east
    right=192.168.3.102
    rightrsasigkey=0sAQNu0dYON+YO5sQup+/4DmNU6vQ/Wj44OVhqT+qiF1NCz3iW+/6pt8mSzwdT2hL4PVh0aCHecaDmYDz7zytEkCXg
    authby=rsasig
    # use auto=start when done testing the tunnel
    auto=start