Pvc Crash Test Dummy

The perfect subject for all of your expieriments can be made with this instructable.

For the body , drill 4 holes (2 on each side). For the arm and leg pieces drill 1 hole.

Just feed them through until both sides are equal.

Drill one hole

No particulare size.

Put one more hole in the back.

Feed the rope through the head and tie a knot on the inside , then tie a knot on the back. Trim the excess rope.

Cover the open end in duct tape.

Draw your own!

Put the face on and then your done, a perfect crash test dummy made for all your expiriments!!

thanks for looking bye.