Pvc Dart Gun SHOOTS UP TO 20 FEET

All we need for this project is;

a piece of pvc about 12'' long, a rubber band, a pen (that can be taken apart in the middle), and duct tape

some tools that would make your experience better;

a hacksaw, vice, and siccors

Take the pvc and put it in the vice and take the hacksaw and cut the pvc into a 4'' section

take the rubber band and cut it in half

Take the cut rubber band and take the pvc. put the sides of the rubber band on the pvc.

duct tape the ends of the rubber band to the pvc.

Take the pen and take it apart. use the tip of the pen, but not the metal tip the middle of the pen

Their is your new pvc gun. also if you want to be mean, cruel and just plain old rude. you can attach a match to the top of the pen so if you light the match and then shoot it it will catch on fire.