Rocket Rifle Prototype/concept

this is a model rocket engine gun
it shoots a size model rocket engines.
feel free too customize.first instructible so be nice.
sorry for no pics.:(

for this instructible you will need :
barrel : copper pipe
wood furniture : 2x6x4
adhesives/mounts : misc.screws,hoseclamps,glue,sand paper,etc.
optional : rubber tubing(to make grips and cheek rest.),
rail mount for scope,bipod attachments silencer,etc.
igniter : stick lighter w/ flexible barrel thing.


1. draw design of gun onto the wood piece.(note the picture)
you can use my design or make your own.

2.using a saw cut out your design.
3.sand to perfection.(or until you like how it looks)

use the picture and use a sharpie to draw design on the pipe.
then use a drill(or whatever you have{i only have a drill})to cut design into the barrel.make sure to cut hole in bottom of the barrel.

get a large bolt that slides freely but still fits in your barrel and saw the threaded part and the head of it off.
then drill hole in it for another but smaller bolt to screw into it. (see pic.)thread thole so you con screw the bolt into it.

now drill hole in the wood stock.(sorry but see pics)
feed the lighter "barrel" through hole in both stock and barrel.
you'll have to zoom in on the pics.

epoxy,hoseclamp the the barrel to the stock.
put the bolt into the barrel and then screw the cocking handle into the bolt.

optional: epoxy or hoseclamp the rail mount(s) 0nto the barrel or stock. whatever you want on there.

pull the bolt back and and load the round into the chamber like a bolt action gun push bolt forward.
pull trigger on the lighter.

have fun
enhance it.
add insight to instructible.
i'm not responsible for anyone's stupidness.