Runaway Mouse

yes to build a runaway mouse all you need is

+ a Microsoft basic optical mouse
+ glue gun
+ dremel
+ 2 AA batteries
+ 4 inches copper wire
+ duck tape
+ electrical tape
+ a motor with 6 inches of wire (to change the battery
+ a brain don't dremel or burn your self

dremel a hole for the scroll wheel to fit through
it must fit loosely tape the scroll wheel down so it peeks out of the hole

YOU MUST LOOK AT THE PICTURES

glue the motor in place must be touching the scroll wheel like in the picture

take your 2 AA battery's and a small piece of wire strip all the plastic off the wire
put one end of the wire on + the other on -
tape it on to keep it tight. wrap it in duck tape

connect the wires look at the picture

glue the shell together

take the usb cable cut it and put it in the hole on the front of the mouse