Knex Rifle

by rajr110 in Living > LEGO & K'NEX

4101 Views, 2 Favorites, 0 Comments

Knex Rifle

C:\Documents and Settings\nutan\Desktop\Picture 10.jpg
the gun can fire anything that can fit in the barel
but the hopper can only be used for blue rods

Make the Firing Pin

C:\Documents and Settings\nutan\Desktop\Picture 12.jpg
C:\Documents and Settings\nutan\Desktop\Picture 10.jpg
make this or make the one on the updated stuff

Make This Piece

C:\Documents and Settings\nutan\Desktop\Picture 111.jpg
C:\Documents and Settings\nutan\Desktop\Picture 121.jpg
this piece uses the following pieces
9 yellow semicircles
5 circles
5 grew rods
2 white rods
2 orange pieces
6 little black pieces

Make This Last Piece

C:\Documents and Settings\nutan\Desktop\Picture 10.jpg
C:\Documents and Settings\nutan\Desktop\Picture 11.jpg
C:\Documents and Settings\nutan\Desktop\Picture 12.jpg
C:\Documents and Settings\nutan\Desktop\Picture 13.jpg
C:\Documents and Settings\nutan\Desktop\Picture 14.jpg
C:\Documents and Settings\nutan\Desktop\Picture 15.jpg
C:\Documents and Settings\nutan\Desktop\Picture 16.jpg
i am sorry but you guys will have to try and figure how to build this piece from looking at the pictures.the inside is quite simple its just those small blue things

Put All the Pieces Together

C:\Documents and Settings\nutan\Desktop\Picture 10.jpg
after putting all the pieces together it shoulds like something
like this

Updated Stuff

Picture 26.jpg
Picture 27.jpg
Picture 28.jpg
Picture 29.jpg
Picture 20.jpg
Picture 21.jpg
Picture 22.jpg
Picture 23.jpg
Picture 25.jpg
this is a much better fireing pin it also stblises the gun when fireing cause there is even wieght on the eather side of the pin

and this hopper i like more you just pop the rods in through the hole