Sew Up Hole in Jeans

sew up that nasty hole in your favorite jeans without an iron on patch.

The hole in these jeans are at the knee, to fit them onto the sewing machine you need to flip them inside out and take out the outside seam. but just enough to fit it on your machine with a little wiggle room to sew.

Now to start sewing, basically you go forward and backwards to make a zigzag effect rotating the jeans just a little after each line, so you move across the hole, rather then staying in the same spot.

I used white thread and did little lines, you can make them longer or use a different color for a stylish effect.

Now that you have your hole all sewn up its time to sew up the hole you had to make to fix them. just line the edges of the fabric up together "they should go together pretty good because they have a crease from where the thread used to be" and just sew them up where the seam was before.
and there you have it, no more hole.