Steampunk Revolver

wicked reinforced steampunk revolver

-tin
-cardboard
-sand paper
-right snip or left snip (your choice i used right snip)
-random pieces of hard ware (bolts and stuff)
-paint (you choose what color)
-permanent marker
-hot glue gun and sticks
-scisors
-leather (optional)

draw the outline of the gun on tin and cut it out be careful though tin can be very sharp in fact gloves would be a good idea

now sand down your tin using the sand paper or a file make sure that its dull enough so thaqt it dosent hurt anyone but if your lazy just wait till step 5

trace your tin shape on to card board about four times if your tin is a little wonky then bend it in to shape with your hands where gloves. once its traced cut all four shapes out

now that you have all the pieces traced out hot glue them all together if you didnt do step 3 glue all around the edeges so that theres no sharp tin coming out

remember that random hardware heres where it comes in handy bulk up your gun with a hole bunch of crap you can do this after painting if you want that would probably be easier but inpacient now is also time to put in the barell thingy i used to water bottle lids glued together but depending on the size of your gun you may have to find something else for the handle i glued on some leather

now its time to paint your gun i painted the handle of mine gold and the rest brown but the barell was black and the hole thing had some copper rubbed in, i went overboard painting mine but you dont have to