Laptop Stand Made From Pvc Pipes
by profpat in Circuits > Computers
12615 Views, 42 Favorites, 0 Comments
Laptop Stand Made From Pvc Pipes
Hi There!
I got this idea from an internet store that sells accessories for laptops.
The materials used is ordinary water PVC pipes. total cost did not exceed $5.00 u.s. here in the Philippines.
You will need 6 pcs. 1/2 PVC elbow, 2 pcs. 1/2 by 2.5 inches PVC pipe, 3 pcs. 1/2 by 7 Inches PVC pipe.
You may adjust the PVC length according to your preferred sizes. I used a pipe cutter to cut the PVC pipes, fortunately I was able
to get the scrap pipe materials from my landlords house construction, saving me some money.
to cover the elbow holes, you may glue a plastic washer over it.
Note: i did not glue the elbows to the pipes, for portability purpose, you can disassemble the stand so that you may put it in the laptop bag.
I got this idea from an internet store that sells accessories for laptops.
The materials used is ordinary water PVC pipes. total cost did not exceed $5.00 u.s. here in the Philippines.
You will need 6 pcs. 1/2 PVC elbow, 2 pcs. 1/2 by 2.5 inches PVC pipe, 3 pcs. 1/2 by 7 Inches PVC pipe.
You may adjust the PVC length according to your preferred sizes. I used a pipe cutter to cut the PVC pipes, fortunately I was able
to get the scrap pipe materials from my landlords house construction, saving me some money.
to cover the elbow holes, you may glue a plastic washer over it.
Note: i did not glue the elbows to the pipes, for portability purpose, you can disassemble the stand so that you may put it in the laptop bag.