Tech Deck Pipe
when I first got may tech deck I was anode at the prices of the ramps and half pipes, although I am certainly not a good tech decker at all!!! I still wanted to make some thing that was not to big, not to heavy and didn't coast to much to makes I came up with this!!!
you will need:
7 pieces of paper
2 shoe boxes
and 2 weights(any think from a roll of bin bags to old cds.)
2 extra pieces of cardboard for the base
2 toilet rolls
you will need:
7 pieces of paper
2 shoe boxes
and 2 weights(any think from a roll of bin bags to old cds.)
2 extra pieces of cardboard for the base
2 toilet rolls
Get the 2 cardboard boxes and lay them on there side then tape the extra bit of cardboard to the end of the shoe box .
now, to help support the top tape toilet rolls on, as the diagram shows and add the weights to each box .
now the simple bit tape the 2 ramps together.
Now cover the whole thing with glue and stick on your sheets of paper on!
Now the fun part just decorate it with logo's, felt tips and crayons
So there you have it 5 simple steps to making a teach deck ramp!!!
I used pictures instead of words because I thought it would of been easier to explain(sorry I had to use paint to draw the diagram as I had all ready made it before I wrote this instructiable.) By the way the one I made is a bit battered because I have had it for a year!
I used pictures instead of words because I thought it would of been easier to explain(sorry I had to use paint to draw the diagram as I had all ready made it before I wrote this instructiable.) By the way the one I made is a bit battered because I have had it for a year!