Very Cheap 1.5 $ Angle Grinder

its for those people who don,t have a high budget, and want an emergency angle grinder .

its ready in half an hour or less ( depending upon the type of epoxy you use)

material required -

1x instant glue ( i used feviquick )

1x araldite

1x angle grinder blade

1x hand drill

1x small plastic piece( optional )

procedure -

mix the 2 set epoxy and keep it aside

put some feviquick on the head of the drill( be careful don't let it go in inside the hole )

put the plastic piece on it

let it dry

put some more feviquick on the plastic piece

mount the angle grinder wheel on it top

see that it is calibrated in the center

put the mixed epoxy on top and bottom where the plastic is stuck to the angle grinder blade ,

let it dry

test-

take a metal piece

turn on the drill

it there is lots of sparks it is good

if not , then it is not callibrated well

break it and restart

have fun

AND PLEASE VOTE FOR ME IN THE BUDGET CONTEST and the TOOL CONTEST !!!!

HAVE A NICE DAY !