Very Strong Hand Gun

by Pat Sowers in Living > LEGO & K'NEX

21716 Views, 20 Favorites, 0 Comments

Very Strong Hand Gun

pat pic 5.jpg
This handgun has a 40-100 foot rang (to get 100 feet or more you need a lot of rubber bands. (I have so many on I can hardly draw it back), it is 11 inches long and very accurate.

The Barrle

pat pic.jpg
You will need
2 long gray rods
8 yellow connectors
18 white circles
1 white rod
1 orange connector
2 gray connectors



Put the 8 yellow connectors on the 2 gray rods
Then put 7 white circles on the gray rods
Then the trigger, 1 orange peace and 1 white rod
Then put 11 more white circles on the gray rods
Then put 1 gray connector at the end or the gray rods
You are finished the barrel it should look like the photo above


Handle X2

pat pic 4.jpg
You will Need 3 yellow rods
3 Orange connectors
10 spacers
The photo above should be able to help you put it together

Firing Pin

pat pic 2.jpg
You will need 1 gray rod
1 orange connector
1 peace of tape
The photo will help you put it together

Out Riggers

pat pi 6.jpg
You will need 1 white rod for each
1 orange connector for each
The photo will help you put it together

Assemble

pat pic 5.jpg
Put the firing pin into the barrel
Slide on the handles
Put on out riggers
Put on site
When you are dune it should look like the photo about


Note, place the rubber bands on equally from the top and the bottom or the firing pin will brake!!!!!!!!!!!!!!!!!!!!!!