Wooden Bench

How to make a wooden bench

Materials
2x6x5                   2x4x9               1x6x5
outdoor wood screws

Power tools:
table saw
sawzall
skill saw
electric screwdriver
clamps (optional)

back two legs are 22.3" long 3" wide, the angle or curve on the back legs do not matter, just make sure the the hole leg is the same width
front two legs are12" long
middle piece 11.5" long
seat 29.5" long

cut pieces to length with table saw,

If you have clamps clamp a back leg to one middle piece, then clamp a front leg to the other end of the middle piece. make sure to have the middle piece overlap the front and back leg, enough so you can screw the parts together.
Then do the same procedure with the other legs

finally if you want sand it, then put a varnish on it.